Description
The BBLADES BSAFE Propeller Lock offers unparallel prop protection through a recessed lock device that is inaccessible to would-be thieves. The locking prop nut is shielded by a stylish, hydrodynamic cone that is secured to the prop hub assembly with an additional locking mechanism requiring a specially designed key for removal, and then capped for additional security. A variety of key patterns are used to further minimize the risk of theft.
The hard-anodized aluminum cone body shields a sealed, water-tight brass and stainless steel locking mechanism that offers protection 24/7; in the water, in transit or in storage. Once installed, the BBLADES BSAFE Propeller Lock never has to be removed until the prop is replaced.
IMPORTANT! Rotation (“Hand”)
There are right-hand rotating (RH) and left-hand rotating (LH) propellers. Most outboard and stern drive propellers are right-hand rotation.
To recognize a right-hand propeller, observe the prop from a position shown below (resting on either end of the hub is OK) and note that the right-hand propeller blade slants from lower left to upper right. A left-hand propeller will have the opposite slant-from lower right to upper left. The blade slopes or climbs up in the direction of the rotation. A right-hand rotation propeller has the same basic blade slope as the threads on the common right-hand screw.
Another method of recognition is to observe the propeller rotating in forward gear from behind the boat. A right-hand propeller turns clockwise; a left-hand propeller turns counter-clockwise.
Make sure to order a prop lock with the correct rotation or rotations (in the case of 2 engines) for your boat setup.
Propeller Locks for Outboard Motors
| Application | Prop Rotation | Thread | Part # |
|---|---|---|---|
| OMC Nitro Gearcase | Standard Right Hand Counter-Rotating LH | 5/8 - 11 5/8 - 11 | M32813R M32813L |
| Mercury/Marine 70 HP and larger (2 stroke) | Standard Right Hand Counter-RotatingLH | 3/4 - 16 3/4 - 16 | M33394R M33394L |
| Mercury Overhub Exhaust Propellers (ie: Choppers, Lightning ET, Blasters, etc | Standard Right Hand Counter-Rotating LH | 3/4 - 16 3/4 - 16 | M33393R M33393L |
| Mercury 50 HP and larger 4 stroke (except the 225 HP 4 stroke before 2005) | Standard Right Hand Counter-RotatingLH | 3/4 - 16 3/4 - 16 | M33394R M33394L |
| Evinrude / Johnson 150 HP and larger (2 stroke) | Standard Right Hand Counter-RotatingLH | 3/4 - 16 3/4 - 16 | M33394R M33394L |
| Honda 70 HP and larger, Suzuki 40 HP and larger, Yamaha 115 HP and larger, Evinrude / Johnson 150 HP and larger (4 stroke) | Standard Right Hand Counter-RotatingLH | 3/4 - 16 3/4 - 16 | M32814R M32814L |
Propeller Locks for Stern Drives
| Application | Prop Rotation | Thread | Part # |
|---|---|---|---|
| MerCruiser® Alpha 1, Bravo 1 (incl. X, XR, TRS, OMC Cobra and King Cobra | Standard RH Counter-Rotating LH | 3/4 - 16 3/4 - 16 | M33394R M33394L |
| MerCruiser® Bravo III and Blackhawk | Standard RH | 1 - 14 | M666665R |
| MerCruiser®SSM II -IV - V- VI - VII | Standard RH Counter-Rotating LH | 1 - 14 1 - 14 | M66666R M66666L |
| Yamaha - ALL | Standard RH Counter-Rotating LH | 1 - 14 1 - 14 | Y32814R Y32814L |
Reviews
There are no reviews yet.